6 WAY FUSE BLOCK

(No reviews yet) Write a Review
SKU:
CZ-FUSE-BOX-6-WAY-LED
  • 6 WAY FUSE BLOCK
  • 6 WAY FUSE BLOCK
  • 6 WAY FUSE BLOCK
$37.99

Description

6-WAY FUSE BOX w/ LED INDICATOR & INTEGRATED NEGATIVE/GROUND BUS BAR
  • Circuits: 6  - 6 Fused Positives and 6 Grounds via Neg Bus Bar
  • Fuse Type:  ATO/ATC
  • Current Rating: 100 AMP Max Per Fuse Block / 30A Max Per Circuit
  • Voltage Rating:  32 VDC Maximum Voltage 
  • Rated Temperature:  -30C to 85C
  • Input Screw Terminal Stud size is #8 for both POS and GND inputs - Use Ring Terminal for #8 stud (see "Terminals & Connectors" category)
  • Output Screw Terminal Size (stud) is #10 - Use Ring Terminals for #10 stud size (see "Terminals & Connectors" category)
  • LED Indicators:  LEDs illuminate to indicate a fuse has blown (see notes below)
  • Overall Dimensions:  87mm (3.43 inches) Wide  x 138.5mm (5.45") Length x 36mm (1.43") High 

 

DESCRIPTION AND BASIC OPERATION:
 
A single POS (+) cable feeds the entire fuse box and distributes 6 Fused POS (+) circuits via the Screw Terminals 
A single NEG(-) cable can feed the 6 NEG (-) screws in the NEG Bus Bar if desired.   Utilizing both NEG and POS inputs, the fuse block can provide a complete power circuit for your needs. 
 
NOTE:  The LED indicators will NOT illuminate unless you are providing a GROUND (-) to the fuse block.  That's because the LEDs need a complete circuit to illuminate.   Even if you're not going to use the NEG Bus Bar to distribute GND to the circuits, you must provide the GND input if you wish to benefit from the LED indicators. 
 
 
CAUTION:  If you are not going to distribute GROUND to the various circuits via the Fuse Block Bus Bar, you may be tempted to use a very small wire to the NEG to only light the LEDs.  Beware that doing this could  present a real danger to a future owner / operator that does not understand that you undersized the NEG because you were only providing a GND for the LEDs, so be careful if you choose this strategy.   We recommend using the appropriate POS and NEG cable sizes to match full power rating usage of the fuse block for proper safety.
 
This product offers excellent and convenient circuit protection for up to 6 independent circuits
Great for rewiring cars, off-road buggies, side by sides, classic cars, RVs / Campers / Travel Trailers, etc
The LED indicators are great for fast troubleshooting and especially nice when having to replace a fuse in the dark (I once changed a Flux Capacitor in the dark, but I'm getting off-topic). 
 
 
NOTE:  Does NOT come with fuses. 
We do sell them here on our site though.
 
 
View AllClose

Related Products

Related Products